Description:

Premium lithium soap grease including solid lubricants with excellent lubricating.

Ideally suited for roller bearings, slide bearings, guides, roller, guides, ball joints, splines and small low-speed Zahnräder.

Properties:

Premium Lithium Soap Grease offers superior load-carrying capability, extended application intervals, good oxidation resistance, lubrication in challenging oil film creation conditions, reduced wear, superior water resistance, corrosion resistance, and prevention of fretting corrosion.

Technical Data:

Appearance: Black

Penetration (worked 60 times): 265 to 295 mm/10

NLGI Class: 2

Drop Point: 185°C

Service Temperature Range: -30°C to 130°C

Bleed (100°C, 24 hours): 2.0%

Evaporation (99°C, 22 hours): 0.2%

Oxidation Resistance (99°C, 100 hours): 0.03 MPa

Water Washout (38°C/1 hour): 1.0%

Shell Four Ball Test (load): 3,150 N

Wear Scar (1 hour, 800 N): 1.2 mm

FAG Bearing Test (6,000 rpm, 130°C, 4,500 N): 40 hours

DN Value: 450,000 mm/min

Application:

Clean the points of contact on the equipment thoroughly to remove any dirt, dust, or previous lubricants.

Application: Apply a small amount directly to the lubrication points.

Ensure precise and controlled application to avoid over-lubrication.

Regular Maintenance: Periodically check the lubrication points and reapply silicone oil as needed.

The frequency of reapplication may vary based on usage and manufacturer recommendations.